How to check tire tread with a coin

A rib refers to the raised portion of tread that spans the circumference of your tire. If part of Lincolns head is always covered by the tread you.

Your tires tread is important.

How to check tire tread with a coin. Performing the Test 1. Do the penny test every month to make sure your tires are safe. Your tread wears down as you drive so checking it.

Grab a clean penny to perform the test on your tires. Dig around in your wallet purse or coin jar for a clean. Rotate the penny so Abes head is.

How to measure your tire tread depth with a coin quarter Some automotive experts believe that using a quarter to test tire depth provides a better read than using a penny. Some independent tests have concluded that cars were able to stop faster with tires that had a little more than 432 of. Heres how it works.

Place a penny between the tread ribs on your tire. A rib refers to the raised portion of tread that spans the circumference of your tire. Turn the penny so that Lincolns head points down into the tread.

See if the top of his head disappears between the ribs. How to Use the Penny Test to Measure Tire Tread. Have a feeling that your tire tread may be dangerously low.

Think that your tires might be borderline bald. Then dig deep into your pockets your couch cushions or your piggy bank grab a penny and head out to your garage. Its time for the penny test.

To effectively measure tire tread depth you first need to know how to position the coin. Place a penny with Lincolns head upside down and facing you into the shallowest groove on the tire. Tread depth check doesnt hold water.

Coins can be substituted as a tire tread depth gauge to measure the critical final few 32nds of an inch of remaining tread depth. Place a penny into several tread grooves across the tire. If part of Lincolns head is always covered by the tread you.

In this video I show you how to check tire tread using a toonie. It is a simple method and there are 3 key points that you should remember. If you place th.

There are several popular ways to check your tire tread depth. One easy way is the penny test. Simply insert a penny into your tires tread groove with Lincolns head upside down and facing you.

If you can see all of Lincolns head your tread depth is less than 232 inch and its time to replace your tires. How to check your tire tread with a penny Insert the penny into the tire tread grooves upside down so the top of Old Abes head is heading into the groove. Be sure to insert the penny into various tread grooves across left to right and around the tire.

Place a penny or a quarter into several tread grooves at least 15 apart on the tire. When part of Lincolns head is covered it means you have more than 232 of tread depth. And if the top of his memorial is always covered then youve got more than 632 of tread depth.

Need to Replace One Tire on Your Subaru. To lower your risk for vehicular accidents associated with low tire tread check your tire tread using the penny test the quarter test by examining the treadwear indicator bars molded into your tires or using a tread depth gauge. Method 1 Using the Penny Test 1.

If you dont have a depth gauge another quick way to measure your tires is with a Canadian nickel. Insert the coin with Queen Elizabeths crown facing down. If you can see the top of the Queens crown your tire is below 232 and needs to be replaced.

The penny test for tires and the quarter test for tires both work the same way. You take the coin stick it into your tires tread head-first and if you can see the top of the presidents head then you need new tires. A penny is obviously smaller than a quarter though and so is the distance from the edge of the coin to the top of the head.

Your tires tread is important. Its one reason why when you drive you dont go skidding off the road when going around a corner. Checking your tire tread.

Place a penny head first into several tread grooves across the tire. If you always see the top of Lincolns head your treads are shallow and worn. If this is the case your tires need to be replaced.

If part of Lincolns head is always covered by the tread you have more than 232 of an inch of tread depth remaining. Place the coin between tread tracks on your tires with the top of the presidents head down. If you can see all of the head you have no tread.

If the tread covers the tops of the head you still have tire tread. All tires have bars on them to gauge the tread wear. How to check tyre tread depth the 20p test The 20p test is a simple quick and easy way of checking the tyre tread of your cars wheels.

Just take a 20p coin and insert it into the tread grooves on the tyre. If you cant see the outer band on the coin your tyres are above the legal limit. The test is conducted by sticking a penny head down in a tire tread.

If you see all of Lincolns head then you should change the tires. Tire Rack which studies and sells tires says that the penny test is outdated and that drivers should use a quarter instead. The quarter gives a measurement of an eighth of an inch instead of a 16th.