How to check your tire tread with a penny

Proper tread allows your vehicle to gain traction and wick water away the tires. Determine whether you can see Lincolns entire head when the penny is inserted into the tread groove.

Simply insert a penny into your tires tread groove with Lincolns head upside down and facing you.

How to check your tire tread with a penny. Performing the Test 1. Do the penny test every month to make sure your tires are safe. Your tread wears down as you drive so checking it.

Grab a clean penny to perform the test on your tires. Dig around in your wallet purse or coin jar for a clean. Rotate the penny so Abes head is.

Heres how it works. Place a penny between the tread ribs on your tire. A rib refers to the raised portion of tread that spans the.

Turn the penny so that Lincolns head points down into the tread. See if the top of his head disappears between the ribs. If it does your tread is still above.

Take a penny and place it between the tire tread blocks with Lincolns head upside down and facing you. If Lincolns head is buried your tires still have more than 232 of tread. Your tires need to be replaced if the head is visible.

After taking the penny test a tires tread can be visually inspected to spot other issues. Place your penny into a tread groove upside down. In other words your penny should be going into the tread headfirst.

Examine the part of the penny thats showing. If you can see the top of Abes head your tread is shallow. Its time for the penny test.

To effectively measure tire tread depth you first need to know how to position the coin. Place a penny with Lincolns head upside down and facing you into the shallowest groove on the tire. Heres a good rhyming memory aid for you to use when trying to remember how the penny test works.

Head into the tread. Simply hold a penny upside down making sure Abraham Lincolns head is facing the ground. Place the penny into your tires tread depth with ol Honest Abe facing toward you.

If you can see the very top of Lincolns head then its time to buy new tires. Why is driving with low tire tread dangerous. Simply insert a penny into your tires tread groove with Lincolns head upside down and facing you.

If you can see all of Lincolns head your tread depth is less than 232 inch and its time to replace your tires. The Quarter Tire Test Another easy coin test is the quarter test. With this easy test a penny can buy you peace of mind when it comes to your tires and safety.

Place a penny head first into several tread grooves across the tire. If you always see the top of Lincolns head your treads are shallow and worn. If this is the case your tires need to be replaced.

If part of Lincolns head is always covered by the tread you have more than 232 of an inch of tread depth remaining. Using the Penny Test 1. Place a penny into any tread groove on your tire.

Determine whether you can see Lincolns entire head when the penny is inserted into the tread groove. Repeat steps 1 through 3 in various grooves all over your tire. If Lincolns head is visible in any groove.

How to check your tire tread with a penny Insert the penny into the tire tread grooves upside down so the top of Old Abes head is heading into the groove. Be sure to insert the penny into various tread grooves across left to right and around the tire. The penny test is an easy way to check the tread on your vehicles tires.

Proper tread allows your vehicle to gain traction and wick water away the tires. If your tread is worn down your vehicle is more likely to slide around in the rain and get stuck in the snow or mud. Your tires are also more likely.

The penny test is an easy way to check the tread on your vehicles tires. Proper tread allows your vehicle to gain traction and wick water away the tires. If your tread is worn down your vehicle.

To perform the quarter test put a quarter between the tread blocks of a tire just like the penny test with Washingtons head upside down. If you cannot see the top of Washingtons head you have 432 of an inch of tread or more. How to measure your tire thread depth with a coin quarter How to measure your tire tread depth with a gauge.

With just a penny between your thumb and pointer finger angle Abraham Lincoln upside down facing down toward the ground. Proceed to stick the penny into various places in the tread across all. The penny test for tires and the quarter test for tires both work the same way.

You take the coin stick it into your tires tread head-first and if you can see the top of the presidents head then you need new tires. A penny is obviously smaller than a quarter though and so is the distance from the edge of the coin to the top of the head. Its easy to check your tires at home.

Its a good idea to inspect them monthly and look for things such as uneven tread wear low tread depth bubbling and cracking. Scottys Automotive Service advises that the best way to stay safe on the road is to replace your tires when you need new ones. Replacing the Penny with the Quarter First its important you understand what the penny test is.

In case youve never done it on your tires it involves taking a one-cent coin.