08
Mar
Slide the blade down toward the windshield. This video shows how to replace the front windshield wiper blades in your 2013 Chevrolet Traverse.
This can happen due to exposure to the sun or for many other reasons.
How to put on windshield wiper blades. To install a wiper blade start by pulling the old wiper away from the windshield and pressing the small tab underneath the blade where the rubber insert meets the metal arm. With everything lined up lower the wiper over the wiper arm putting the arm in between the sides of the wiper and with. Move the hook over the plastic clip then pull the wiper upward so that the clips rounded edge slides into the hook.
Pull it tight so the assembly clicks into place. Lift the wiper arm away from the windshield and depress the small tab on the underside of the wiper where it meets the wiper arm. Slide the wiper blade off the arm by pulling downward.
Attach the new wiper blade. Pull the wiper blade tight onto the arm. Raise the metal wiper arm away from the windshield.
It should be able to hold steady in a position perpendicular to. Unhook the old wiper blade. Look at the joint where the rubber wiper blade meets the metal arm.
Lift the wiper blades position the mat in place and lower the wiper gently onto the mat. After the snowstorm has passed and you need to drive lift the wiper blades remove the mat. Apply the glass cleaner to the windshield by liberally spraying it on the windshield or with the.
Wipe the cleaner and the dirt away with a clean cloth or the rubber side of a squeegee. Apply cleaner to wiper. Dip a cloth into petroleum jelly and wipe it along the entire length of the rubber of each blade making certain that the jelly has a chance to soak into the rubber.
Soak a soft cloth with rubbing alcohol and wipe down your cars wiper blades. This will stop them from sticking to the windshield and should prevent refreezing. After pivoting the blade push the clip back toward the wiper arm.
Slide the blade down toward the windshield. This video shows how to replace the front windshield wiper blades in your 2013 Chevrolet Traverse. Always replace both wiper blades even if only one side is streaking - the rubber on the opposite side is likely worn as well.
We recommend changing the wiper blades on your Traverse at least once a year even if you dont use your wipers much. Slide the new blades on in the opposite way that the old ones came off. You will likely here a click when a tabbed blade locks into place.
On blades with a clip you may need to close the clip to lock the blade in place. When youre done rest the wipers against the windshield again. Turn the vehicle key to on engine off and turn on the wipers.
Turn the ignition off when the blades are vertical on the windshield so that theyre both accessible. Youll be working with the wiper arm which is usually metal and the wiper blade insert the rubber piece that fits into the wiper arms grooves. Look for a button or a latch to lift and slide off the old wiper blade.
Before installation of the new wiper blade slide off the plastic protector from the blade rubber. Connect the new Trico Force Premium Beam Blade wipers. The rubber on your windshield wipers will sometimes become hard.
This can happen due to exposure to the sun or for many other reasons. Fixing this issue is not overly difficult though. You can soften the rubber on your wiper blades by using a little bit of rubbing alcohol.
Look for a button or a latch to lift and slide off the old wiper blade. Before installation of the new wiper blade slide off the plastic protector from the blade rubber. Connect the new Trico Force Premium Beam Blade wipers.